辽宁附近有没有服务

Welcome to our official website! contact us | Website map | Add to collection

Hotline: thirteen billion five hundred and eighty-two million seven hundred and thirty-four thousand and sixty-six

Heating furnace for hot rolling billet

Application: It is suitable for rolling heating of continuous casting billet, cold billet and steel billet
 Heating furnace for hot rolling billet


Process parameters of heating furnace for hot rolling billet:
1. Equipment brand: YUANTUO electromechanical
2. Equipment name: heating furnace for hot rolling billet (non-standard product, customized processing)
3. Steel material: Q235q, q345q, Q245R, A32, D32, A36, D36, etc
4. Billet size range: (6mm × 6mm) - (500mm × 500mm)
5. Billet length range: more than 2m
6. Large bending degree of billet before entering furnace: it has different degrees of bending according to different steel grades. What to do if the bending degree of billet is greater than 3mm / m before entering the electric furnace? We designed it
Billet heating furnace According to the bending degree of your steel, adjust the size of the sensor to meet your requirements.



The heating furnace of hot rolling billet is controlled by PLC
Provide remote operation console with touch screen or industrial computer system according to user requirements.
With customized man-machine interface and highly humanized operation instructions, one person can operate the whole set of equipment and save labor and cost.
Heating furnace for hot rolling billet Full digital, high depth adjustable parameters, as long as the steel type, size and equipment of the workpiece are input, the relevant parameters are automatically called, without manual recording, consulting and input. It has the function of high precision historical curve. Can be U disk or network backup, data can be stored for a long time.
The equipment is equipped with one key reduction system. (if there is a problem in the adjustment, or if you want to restore the device to its original state, just press a button to restore the original data)

  Inductor process of hot rolling billet heating furnace:    
The furnace body adopts profiling design. The copper tube is wound with T2 oxygen free copper, and the wall thickness of the copper tube is greater than or equal to 2.5mm. The furnace body insulation material is made of knot material imported from the United States, with high strength, high temperature resistance and long service life. A water-cooled idler is installed between each two sections of the furnace body, and each roller is equipped with a variable frequency speed regulating motor. Both ends of the furnace body are packaged with a whole piece of copper plate,. The chassis frame of furnace body is made of non-magnetic stainless steel or aluminum alloy to reduce the influence of magnetic flux leakage and heating on other devices. The water temperature of each furnace is too high.



Hot rolled billet Medium frequency induction furnace Service conditions and user provided part:
Provide high voltage power to the primary side of the transformer.
Altitude: ≤ 2000m; relative humidity: ≤ 90%
The equipment must be grounded: it is recommended to use galvanized pipe to drive into the ground and connect with the equipment reliably. The connecting wire should be more than 10 flat copper wire. The power supply, furnace body and operation console are separately set with ground wire.
Equipment cooling (according to the user's site, there are special technical personnel to conduct on-site guidance)
Oil for transformer provided by users.

Please indicate the source of reprinted articles: http://poompae.com/tzpl/597.html